JVC KW-AV61BT - Manual (Page 67)

67
ENGLISH
Symptom Remedy/Cause
Bluet
ooth (only f
or
KW
-A
V61BT
)
Phone sound quality is poor. • Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to place where you can get a better signal
reception.
The sound is interrupted or skipped while
using a Bluetooth audio player. • Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the player
again.
The connected audio player cannot be
controlled. Check whether the connected audio player supports AVRCP
(Audio Video Remote Control Profile).
Bluetooth device does not detect the unit. • Check whether the Bluetooth adapter (KS-UBT1) is
inserted correctly.
• Search from the Bluetooth device again.
The unit does not make pairing with the
Bluetooth device. • For devices compatible with Bluetooth 2.1: Register the
device using a PIN code. (☞ page 47)
• For devices compatible with Bluetooth 2.0: Enter the
same PIN code for both the unit and target device.
If the PIN code of the device is not indicated on its
instructions, try “0000” or “1234.”
Echo or noise occurs. • Adjust the microphone unit position.
• Make sure that the NR/EC (Noise reduction/Echo cancel)
function is activated. Adjust the echo level if necessary
(☞ page 51)
The unit does not respond when you try to
copy the phone book to the unit. You may have tried to copy the same entries (as stored)
to the unit.
EN_KW-AV61E.indb 67 EN_KW-AV61E.indb 67 12/11/09 11:28 12/11/09 11:28