JVC KW-AV61BT - Manual (Page 48)

48
ENGLISH
2 Change the PIN code.
• You can skip changing the PIN code.
• The maximum digit of the PIN code that can be
set is 16.
PIN code (initial: 0000)
Deletes last entry
• The Bluetooth connection by <Audio
Connection> is only available when “BT
Audio” is selected as the source.
3 Operate the Bluetooth device to
complete pairing.
When pairing is complete, the device is listed on
<Connect Device>. To use the paired device,
connect the device on <Connect Device>
(☞ the right column).
Connecting/disconnecting a
registered Bluetooth device
1 Display the <Bluetooth Setup> screen.
(☞ page 47)
2
To connect
Select [Connect] for the target device, and then
select the device you want to connect.
“Connected” appears. Press [OK] to confirm the
operation.
• All registered devices (mobile phone and audio
player) are listed on <Connect Device>.
– Selectable items depend on the device you
are operating.
To disconnect
Select [Disconnect] for the target device.
A confirmation message appears. Press [Yes].
Deleting a registered Bluetooth
device
1
On <Connect Device> screen (☞ Step 2 above)
2
Select a device to delete.
A confirmation message appears. Press [Yes].
EN_KW-AV61E.indb 48 EN_KW-AV61E.indb 48 12/11/09 11:28 12/11/09 11:28