JVC KD-AVX40 - Manual (Page 40)

38
ENGLISH
5
6
Operate the target cellular phone.
Enter the same PIN code (as entered in the above
step) on the cellular phone then transfer the phone
book memory to the unit. (Refer to the instruction
manual supplied with your cellular phone.)
7
Finish the procedure.
• If you try to copy a 101st phone book entry,
“Phonebook Full” appears on the monitor. Delete
unwanted names before copying (☞ page 37).
Presetting the phone numbers
You can preset up to six phone numbers.
1
Display the phone number you want to
preset by using <Redial>, <Received Calls>,
<Phonebook>, or <Phone Number>.
2
3
Select a preset number.
4
Store the phone number.
The phone number selected in step 1 is now stored
in preset number 5.
To call a preset number
On the remote:
On the unit:
See ”Making a call.” (☞ pages 35 and 36)
In step 4...
1
Select <Preset Calls>.
The Preset Calls List appears.
2
Select the preset number.
Switching conversation media
(the unit/cellular phone)
During a phone call conversation...
Then, continue your conversation using the other
media.
You can use the following buttons on the remote
controller for the Bluetooth phone operations. For
details, ☞ pages 10 and 11.
[Hold]
EN_KDAVX4020[E]5.indb 38 EN_KDAVX4020[E]5.indb 38 08.12.25 4:38:12 PM 08.12.25 4:38:12 PM