Using the bluetooth cellular phone, English – JVC KW-AVX810 User Manual
Page 36
Connected Device Name
36
ENGLISH
Using the Bluetooth cellular phone
Adjusts the volume of the incoming calls.*
3
☞ page 38
Sound mode
(☞ page 50)
Status of the device
Signal strength/Battery
remainder (only when
the information comes
from the device)
Bluetooth icon lights
up when the adapter
is connected.
*
1
When a call comes in...
The source is changed to “Bluetooth PHONE”
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
(☞ page 60)
When <Auto Answer> is deactivated...
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
/ATT or VOL +/–).
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
/ATT or VOL +/–).
• You can adjust the microphone volume. (☞ page 60)
*
1
When a cellular phone with audio function is connected, appears.
*
2
This button appears when the Bluetooth Adapter is connected.
*
3
This adjustment does not affect the volume level of the other sources.
~
Press [SOURCE], then press [Bluetooth PHONE].
(☞ page 11)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Press
[
]
.
• You can also use MENU on the monitor panel.
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu).
(☞ pages 59 and 60)
[
5
∞
]
Selects the registered device
(“NEW DEVICE” appears when a new device can be registered.)
[
]
Hold: Activates <Voice Dialing> function
[
] Displays
<Dial Menu> screen.
*
2
EN_KW-AVX810[EU]ff.indb 36
EN_KW-AVX810[EU]ff.indb 36
08.2.6 3:11:08 PM
08.2.6 3:11:08 PM