JVC KW-AVX810 - Manual (Page 40)

Connected Device Name
40
ENGLISH
* 1 Indicates the button pressed. It may be different from the operation status.
* 2 This button appears when the Bluetooth Adapter is connected.
* 3 You cannot select “NEW DEVICE” when a Bluetooth audio player is connected.
~
Press [SOURCE], then press [Bluetooth
AUDIO]. (☞ page 11)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ
Start playback.
• See page 34 for connecting a new device.
• See page 35 for connecting/disconnecting a
registered device.
• See page 35 for deleting a registered device.
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
Starts playback/pauses.
Reverse/forward skip
Adjusts the volume.
Status of the device
Signal strength/Battery
remainder (only when
the information comes
from the device)
Sound mode
(☞ page 50)
* 1
The Bluetooth icon
lights up when the
adapter is connected.
Using the Bluetooth audio player
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.
jvc-victor.co.jp/english/car/>
[
3
/
8
] [
7
] Starts playback/pauses
[
4 ¢
] Reverse/forward search
[
5 ∞
] Selects the registered device
(“NEW DEVICE” appears when a new device can be registered.* 3 )
[ ] Displays <Dial Menu> screen.
* 2
EN_KW-AVX810[EU]ff.indb 40 EN_KW-AVX810[EU]ff.indb 40 08.2.6 3:11:11 PM 08.2.6 3:11:11 PM