Candy GO L - Manual (Page 4)

6
Description of controls
Door handle A
Programme selector with "OFF" position B
"Temperature Selection" button C
"Spin Selection" button D
"Stain level" button E
"Delay Start" button F
Programme Lock button G
Pre-wash button H
"Stain Vanish" button I
“Rinse Hold” button L
"Allergy care" button M
"Easy Iron" button N
"Start/Pause" button P
Digital Display Q
Detergent drawer R
Fig. 1
Programme selector with OFF position
Press the "Start/Pause" button to start the selected cycle.
The programme carries out with the programme selector stationary on the selected programme
till cycle ends.
Switch off the washing machine by turning the selector to OFF.
7
B
A
R
C Q D F E
G H I L M N P
Today, most detergents have been improved to wash efficiently at
lower temperatures, therefore we have set the default temperature
settings of each programme to a lower level, saving electricity and
reducing the carbon footprint of your machine.
You can select an high temperature by pressing the temperature
button.
Please refer to the programme guide for the maximum
temperature to which each programme can be set.
When the programme selector is turned
the display lights up to show the settings
for the programme selected.
For energy saving, at the end of the cycle
or with an inactivity period, the display
level contrast will decrease.
N.B. to switch the machine off, turn the
programme selector to the “off” position.
NOTE:
The programme selector must be return to the OFF position at the
end of each cycle or when starting a subsequent wash cycle prior
to the next programme being selected and started.
B
Door handle
Press the finger-bar inside the door handle to open the door.
A