Candy GO L User Manual
Page 7
12
“START/PAUSE” button
Press to start the selected cycle .
Changing the settings after the programmes has started (PAUSE)
Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the
options buttons and time remaining indicator will show that the machine has been paused,
adjust as required and press the “START/PAUSE” button again to cancel the flashing lights.
If you wish to add or remove items during washing, wait 2 minutes until the safety device
unlocks the door.
When you have carried out the manoeuvre, close the door, press "Start/Pause" button and
the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set the selector to the OFF position.
Select a different programme.
Re-set the programme selector to the OFF position.
NOTE:
Few seconds after the start, the kg detector function (active only
on cotton and synthetics programmes) will weigh the clothes and
update the maximum wash time remaining within the first 4
minutes of the wash cycle.
while this function is operating the kg detector indicator is on.
P
13
“DIGITAL” Display
The display’s indicator system allows you to be constantly informed about the status of the
machine:
1) SPIN SPEED
Once the programme has been selected, the maximum spin speed allowed for that
programme appears on the display. Pressing the spin button will reduce the speed by 100
rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is
possible to omit the spin by pressing the spin button repeatedly.
2) WASH TEMPERATURE
When a programme is selected on the display is show the recommended wash temperature.
The temperature button can be used to decrease or increase the temperature of your chosen
wash cycle.
Each time the button is pressed, the new temperature level is shown on the display.
3) Kg DETECTOR indicator
(Function active only on Cotton and Synthetics programmes)
Through every wash phase “Kg DETECTOR” allows to monitor information on the wash load
in the drum.
So, as soon as the “Kg DETECTOR” is set in motion, in the first 4 minutes of the wash, it:
- adjusts the amount of water required
- determines the length of the wash cycle
- controls rinsing
according to the type of fabric selected to be washed it:
- adjusts the rhythm of drum rotation for the type of fabric being washed
- recognises the presence of lather, increasing, if necessary, the amount of water during rinsing
- adjusts the spin speed according to the load, thus avoiding any imbalance.
In this way “Kg DETECTOR” is able to decide, by itself, the most suitable programme for each
individual wash from the hundreds of possible wash combinations.
“Kg DETECTOR” meets the need for easy use by permitting a simplified programme
selection. Infact, the user need only tell the machine the type of fabric in the drum and the
degree of soiling, to obtain a perfect wash with the highest level of drying possible with a spin
which really cares for your clothes.
Q
1
9
3
4
5
6
7
8
2
h m m