Acclaim Lighting X-Chip Driver IR User Manual
Page 9
RED pushbutton
GREEN pushbutton
BLUE pushbutton
CYAN pushbutton
MAGENTA pushbutton
YELLOW pushbutton
WHITE pushbutton
AMBER pushbutton
AUTO pushbutton
UNIT SETTING pushbutton
PATTERN/RED key
PATTERN/RED key
SPEED/GREEN key
SPEED/GREEN key
FADE/BLUE key
FADE/BLUE key
BRIGHTNESS key
BRIGHTNESS key
Red, 100% brightness
Green, 100% brightness
Blue, 100% brightness
Cyan, 100% brightness
Magenta, 100% brightness
Yellow, 100% brightness
White, 100% brightness
Amber, 100% brightness
The color is changing automatically, and the brightness is 100%.
Cancel the infrared remote operations. All settings will be done by flipping
dip-switches.
Select next pattern / increase red brightness.
Holding the key down will gradually increase the brightness to its maximum value.
Select previous pattern / decrease red brightness.
Holding the key down will gradually decrease the brightness to its minimum value.
Increase speed/ increase green brightness.
Holding the key down will gradually increase the brightness to its maximum value.
Decrease speed / decrease green brightness.
Holding the key down will gradually decrease the brightness to its minimum value.
Increase fadetime/ increase blue brightness.
Holding the key down will gradually increase the brightness to its maximum value.
Decrease fadetime / decrease blue brightness.
Holding the key down will gradually decrease the brightness to its minimum value.
Increase master brightness.
Holding the key down will gradually increase the brightness to its maximum value.
Decrease master brightness.
Holding the key down will gradually decrease the brightness to its minimum value.
ON/OFF pushbutton
Power ON/OFF
Pushbuttons&Keys
Functions
NOTE:
1.The built-in patterns consists of
2.There are optional 10 different levels for chase speed;
1~10 patterns plus a sequence of 10 patterns.
Speed
Time
10
1S
9
2S
8
4S
7
8S
6
16S
5
4
3
2
1
32.5S
65S
130S
260S
512S
3.And fade time is available from 0% through 100%, total 11levels, 10% per level.
4.Effective distance from IR EYE(sensor) to LED Remote shall be limited within the range of 10m. Otherwise, it
results out of control.
-Page 9-