Acclaim Lighting AL Dimmer 3 HP - Manual (Page 5)

NOTE:
Effective distance from IR sensor to LED Remote controller shall be limited within the range of 10m. Otherwise, it
results out of control.
Keys Functions
RED
GREEN
BLUE
CYAN
MAGENTA
YELLOW
WHITE
AMBER
AUTO
UNIT SETTING
PATTERN/RED
PATTERN/RED
SPEED/GREEN
SPEED/GREEN
FADE/BLUE
FADE/BLUE
BRIGHTNESS
BRIGHTNESS
Red, 100% brightness
Green, 100% brightness
Blue, 100% brightness
Cyan, 100% brightness
Magenta, 100% brightness
Yellow, 100% brightness
White, 100% brightness
Amber, 100% brightness
Automatically cycles through colors at100% brightness
All settings were set by dip-switches.
Selects the next pattern or increase the Red brightness.
Holding the key down will gradually increase the brightness to its maximum value.
Selects the previous pattern or decrease the red brightness.
Holding the key down will gradually decrease the brightness to its minimum value.
Selects the Speed or increase the Green brightness.
Holding the key down will gradually increase the brightness to its maximum value.
Selects the Speed or decrease the Green brightness.
Holding the key down will gradually decrease the brightness to its minimum value.
Selects the Fadetime or increase the Blue brightness.
Holding the key down will gradually increase the brightness to its maximum value.
Selects the Fadetime or decrease the Blue brightness.
Holding the key down will gradually decrease the brightness to its minimum value.
Increases the master brightness.
Holding the key down will gradually increase the brightness to its maximum value.
Decreases the master brightness.
Holding the key down will gradually decrease the brightness to its minimum value.
ON/OFF On/off the unit.
-5-
Rev1.2
24-004-2685-00