Accusys ExaSAN SW08-Q4 - Manual (Page 17)

2. In the “RAID LEVEL” field, select “R5” from the drop-down list
3. In the “SAN Software” filed, select “SAN With MetaData” from the drop-down list
4. Click “Next”
*Quick Setup only supports one-to-four A12S-PS unit(s). If your RAID system requirement is anther form factor like 2U/3U/4U, you
may have to reset the setting through RAID Guide X. Please refer to the User Guide for RAID configuration information.
User Guide
P15
A12S2-PS X 1 A12S2-PS X 2
Disk1~10: R5 (Data)
R5 (Data)
Disk11~12: R1 (Metadata)
R1 (Metadata)
A12S2-PS X 4
* with MDC codition