Accusys ExaSAN SW08-Q4 - Manual (Page 19)

2.2 Verify Accessible LUNs
To view the two LUNs which we just created, open
the Mac “System Profiler” and then expand the
“Parallel SCSI” tab. You should see that two ExaSAN
LUNs are visible as described below.
Find one LUN in “SCSI target Device @0,” another
LUN in “SCSI Target Device @1.” Both are identified
with Manufacturer “ACCUSYS” and Model “A12S2-
PS.”
Note that you will need to perform this check on all
computers in the SAN. If you do not see any LUN
here, you’d have to troubleshoot the connection
bet ween the ExaSAN R AID system and the
SW08-Q4 switch.
User Guide
P17