English, Product features – Remington S9500 User Manual
Page 3
GB
D
NL
F
E
I
DK
S
FIN
P
SK
CZ
PL
HU
N
RU
TR
RO
GR
SL
AE
HR/ SRB
Thank you for buying your new Remington
®
product. Before use, please read
these instructions carefully and keep them in a safe place for future reference.
PRODUCT FEATURES
A. Advanced Ceramic Ultimate Coating with Real Pearl Shimmer
B. Longer length floating plates – for even pressure on the hair as you straighten
C. High heat 150 -235°C
D. Fast heat up in 15 second
E. On-off switch – to turn on press and hold for 1 second until the LCD display lights up
Press again for 1 second to turn off
F. Adjustable +/- temperature controls, provides precise heat control to suit hair type and
length - 150°C-235°C
Recommended temperatures to suit hair types…
150°C - 180°C – Fine Hair
180°C - 200°C – Medium Hair
200°C - 235°C – Thick Hair
G. Innovative LCD temperature display
H. Switch lock function - Set the desired temperature by pressing +/- buttons and lock the
switch settings by pressing the ‘-‘ button for 2 seconds. A ‘padlock’ symbol will appear
next to the temperature. This will prevent accidentally changing the temperature
settings while using the straightener. To unlock the switch settings, press and hold the
‘-‘ button again for 2 seconds.
I. Turbo boost function – automatically sets the highest temperature. Hold the ‘+’ button
for 2 seconds and the temperature will boost to 235°C
J. Automatic safety shut off – This unit will switch itself off if no button is pressed or it is
left on after 60 minutes
K. Hinge lock for storage :- Plates can be shut together for easy storage
Locked- Push the hinge lock up to the locked position
Unlocked- Pull the hinge lock down to the unlocked position
NOTE: Do not heat the unit in the locked position
K. Multivoltage: For use at home or abroad.
When used at 120V the heat up times and temperatures may vary.
L. Heat proof bag and mat
M. 3m swivel cord
5 year guarantee
1
ENGLISH
120 - 240V
MULTI VOLTAGE
GB
100220 REM IFU S9500_21L.indd GB_1
100220 REM IFU S9500_21L.indd GB_1
30.03.10 21:41
30.03.10 21:41