Yukon POINT 15x56 User Manual

Page 8

Advertising
background image

5

Aim to keep the lenses free of any dirt accumulation, as much as the conditions allow.
Before cleaning the lenses, blow on them to remove sizable particles of sand and dust.
When wiping optical surfaces, please use the lens cloth which comes standard with the set. If a lens cloth
is not available, you can use any soft, clean fabric (soft cotton cloth, flannel, silk, or a cotton swab are best).
Any grease should be removed with a tissue soaked in rubbing alcohol. In field conditions or if you do
not have rubbing alcohol, breathe right onto the surface of the lens and dry the condensation off with a soft,
clean cloth.

It is strongly forbidden to repair or disassemble the binoculars! Failure to comply with this
requirement may void the warranty.

Attention!
In order to avoid damaging the lens' coatings, never use paper (dry or wet) to clean the lens nor apply rubbing alcohol
directly onto the lens.

To clean the binoculars' exterior, please use a dry tissue. For sheen, apply a few drops of synthetic cleaner
to the tissue.

PROPERLY STORING AND CARING FOR YOUR BINOCULARS

30

Non esporre per lungo tempo ad alte temperature o alla luce diretta del sole. Non lasciarlo in prossimità
di fonti di calore.
Quando non utilizzato, conservare il binocolo all'interno della borsa da trasporto in luogo asciutto e ben
ventilato.

Look through the right eyepiece at a distant object and turn the adjustment ring of the right eyepiece (3) until
you get a crisp image.
Turn the central focusing wheel (2) until you get a sharp image through both barrels.
As you continue viewing, you may find that you need to refocus the image. This should be done only using
the central focusing wheel (2) as you have already tuned the binoculars to your individual needs.

Advertising