Fpc 7120 – Acnodes FPC 7120 User Manual
Page 19
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7120
Fanless Touch panel PC
Network Interface
The Realtek RTL8111B Gigabit Ethernet supports the PCI Express 1.0a bus interface for host communica-
tions with power management and is compliant with the IEEE 802.3u specification for 10/100Mbps
Ethernet and the IEEE 802.3ab specification for 1000Mbps Ethernet. The Ethernet port provides a stan-
dard RJ-45 jack.
USB Ports
Four USB (two is optional) devices may be connected to the system through an adapter cable. Various
adapters may come with USB ports. USB usually connect the external system to the system. The USB
ports support hot plug-in connection. Anyway, you should install the device driver before you use the device.
External VGA
FPC 7120 series has one VGA port that can be connected to an external CRT/LCD monitor. Use VGA
cable to connect to an external CRT/LCD monitor, and connect the power cable to the outlet The VGA
connector is a standard 15-pin D-SUB connector.