Acnodes FPC 7120 - Manual (Page 52)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7120
Fanless Touch panel PC
5.12 Set Supervisor/ User Password
Steps to set supervisor/user password are described as follows:
New password setting:
1. While pressing <Enter> to set a password, a dialog box appears to ask you enter a password.
2. Key in a new password. The password cannot exceed eight characters.
Please Enter Your Password
3. System will request you to confirm the new password again.
Please Confirm Your Password
4. When completed, new code takes effect.
No Password Setting:
If you wants to disable the password, just <Enter> as a password input is requested.
If you forget password:
If you forget the password, the only way to access the system is to clear the CMOS memory. You may
remove the battery from motherboard and put it back to clear the setting.