Acnodes FPC 7120 - Manual (Page 38)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7120
Fanless Touch panel PC
5.4 Advanced BIOS Features
This section allows you to configure your system for basic operation. You can select the system's default
speed, boot-up sequence, keyboard operation, shadowing and security.
CPU Feature
The CPU Feature menu is listed below:
> Deplay Prior to Thermal
Options: 4 Min, 8 Min, 16 Min, 32 Min
Default: 16 Min
> Thermal Management
Options: Thermal Monitor 1/2/3
Default: Thermal Monitor 1
> Thermal Monitor Bus Ratio
This item sets the frequency (bus ratio) of the throttled performance that will be initiated when the on
die sensor goes from not hot to hot. You cannot make change to these items.
> Thermal Monitor Bus VID
This item sets the voltage of the throttled performance that will be initiated when the on die sensor
goes from not hot to hot. You cannot make change to these items.
Hard-Disk Boot Priority
This is for setting the priority of the hard disk boot order when the "Hard Disk" option is selected in the
"[First/Second/Third] Boot Device" menu item. You can change the priority on the List.