Command to the acr100i, Ccid command pipe bulk-out messages, Pc_to_rdr_iccpoweron – ACS ACR100I SIMFlash II User Manual
Page 10
Document Title Here
Document Title Here
Document Title Here
ACR100I Reference Manual
Version 1.00
Page 10 of 20
www.acs.com
.hk
www.acs.com.hk
Offset
Field
Size
Value
Description
32
dwSynchProtocols
4
00000
000h
ACR100I does not support
synchronous card
36
dwMechanical
4
00000
000h
ACR100I does not support
special mechanical
characteristics
40
dwFeatures
4
00010
030h
ACR100I supports the following
features:
Automatic ICC clock
frequency change
according to parameters
Automatic baud rate
change according to
frequency and FI,DI
parameters
TPDU level exchange
with ACR100I
44
dwMaxCCIDMessageLen
gth
4
00000
10Fh
Maximum message length
accepted by ACR100I is 271
bytes
48
bClassGetResponse
1
00h
Insignificant for TPDU level
exchanges
49
bClassEnvelope
1
00h
Insignificant for TPDU level
exchanges
50
wLCDLayout
2
0000h No LCD
52
bPINSupport
1
00h
No PIN Verification
53
bMaxCCIDBusySlots
1
01h
Only 1 slot can be
simultaneously busy
7.1. Command to the ACR100I
7.1.1.
CCID Command Pipe Bulk-OUT Messages
ACR100I shall follow the CCID Bulk-OUT Messages as specified in CCID section 4. In addition, this
specification defines some extended commands for operating additional features. This section lists
the CCID Bulk-OUT Messages to be supported by ACR100I.
7.1.1.1.
PC_to_RDR_IccPowerOn
Activate the card slot and return ATR from the card
Offset
Field
Size
Value
Description
0
bMessageType
1
62h
1
dwLength
4
00000
000h
Size of extra bytes of this message
2
bSlot
1
Identifies the slot number for this
command