ACS ACR100I SIMFlash II - Manual (Page 15)

Document Title Here Document Title Here
Document Title Here ACR100I Reference Manual
Version 1.00
Page 15 of 20
www.acs.com
.hk
[email protected]
www.acs.com.hk
7.1.2. CCID Bulk-IN Messages
The Bulk-IN Messages are used in response to the Bulk-OUT Messages. ACR100I shall follow the
CCID Bulk-IN Messages as specified in CCID Section 4. This section lists the CCID Bulk-IN
Messages to be supported by ACR100I.
7.1.2.1. RDR_to_PC_DataBlock
This message is sent by ACR100I in response to PC_to_RDR_IccPowerOn,
PC_to_RDR_XfrBlock and PC_to_RDR_Secure messages.
Offset Field Size Value Description
0 bMessageType 1 80h
Indicates that a data block is being
sent from the CCID
1 dwLength 4 Size of extra bytes of this message
5 bSlot 1 Same value as in Bulk-OUT message
6 bSeq 1 Same value as in Bulk-OUT message
7 bStatus 1
Slot status register as defined in CCID
Section 4.2.1
8 bError 1
Slot error register as defined in CCID
Section 4.2.1 and its specifications
Section 5.2.8
9 bChainParameter 1 00h RFU (TPDU exchange level)
10 AbData
Byte
array
This field contains the data returned
by the CCID
7.1.2.2. RDR_to_PC_SlotStatus
This message is sent by ACR100I in response to PC_to_RDR_IccPowerOff,
PC_to_RDR_GetSlotStatus, PC_to_RDR_Abort messages and Class specific ABORT request.
.
Offset Field Size Value Description
0 bMessageType 1 81h
1 dwLength 4
00000
000h
Size of extra bytes of this message
5 bSlot 1 Same value as in Bulk-OUT message
6 bSeq 1 Same value as in Bulk-OUT message
7 bStatus 1
Slot status register as defined in
CCID Section 4.2.1
8 bError 1
Slot error register as defined in CCID
Section 4.2.1 and its specifications in
Section 5.2.8