ACS ACR100I SIMFlash II - Manual (Page 5)

Document Title Here Document Title Here
Document Title Here ACR100I Reference Manual
Version 1.00
Page 5 of 20
www.acs.com
.hk
[email protected]
www.acs.com.hk
3.0. System Block Diagram
The USB Hub Controller is the communication interface between the PC and the MCU of the smart
card and the flash memory via USB port connection. The flash memory is available for the end-user to
use as storage. In Windows Explorer, the device is detected as a removable disk. The ACR100I is
powered from the USB port without other external power supply.
Figure 1: ACR100I System Block Diagram
2 PORT
USB 2.0
Hub
Controller
Smart Card
Interface Circuit
ACR100I
USB
Interface
Flash memory
Antenna for
Mifare Chip
SIM-sized
Smart Card
Mifare Chip