ACS AET63 BioTRUSTKey - Manual (Page 6)

4.0. Power Supply
The AET63 requires a voltage of 5V DC, 100mA, regulated, power supply. The AET63 gets the power
supply from PC (through the cable supplied along with each type of reader).
Status LEDs
Two green LED on the front of the reader indicates the activation status of the smart card interface
and the status of power supply of the device:
First Green LED Indicates power supply to the device, i.e., the device is receiving power from
the computer. As long as the device is connected to the PC, this LED light is
on.
Second Green LED Indicates that a smart card is present in the device, i.e., the smart card is
activated. As long as there is a smart card inserted in the device, this light is
on.
NOTE: This is applicable if you are using the PCSC device installer for AET63
Document Title Here Document Title Here
Document Title Here AET63 Reference Manual
Version 2.2
Page 6 of 26
[email protected]
www.acs.com.hk