Activeforever Eye-Vac EVPro Electric Dust Pan - Manual (Page 5)

USER MAINTENANCE INSTRUCTIONS
1. To empty the EYE-VAC PROFESSIONAL Collection Bin, turn the Control Dial to the OFF position and
unplug the unit.
2. Pull the Collection Bin outward from the front of the Bin Cavity. Grasp the Collection Bin Grip firmly and
lift it out and away from the EYE-VAC PROFESSIONAL Main Unit.
3. Holding the Collection Bin firmly with one hand, grasp the Collection Bin Lid Handle with the other hand
and pull the Lid straight up and out to remove.
4. Turn the Collection Bin upside down over a trash can. Make sure you empty all dirt and debris from inside
and below the Bin. To ensure that all the dirt spills out, tap the side of the Collection Bin gently against the
edge of the trash can. Re-attach the Collection Bin Lid to the top of the Collection Bin.
5. Clean Sensors, Dirt Inlet area and Collection Bin Cavity with a damp rag or towel.
6. Insert the assembled Collection Bin with Lid fitted snugly into position bottom-first into the Collection Bin
Storage Cavity at the front of the EYE-VAC PROFESSIONAL. The 2 grooves in the bottom of the Bin fit
easily over the rod in the front of the unit. Grasp the Collection Bin Grip and lock the Collection Bin back
into position.
Health Tip
If you suffer from allergies or asthma, take the Collection Bin outdoors to empty. As you empty the dirt
into the trash can, gently tap the Collection Bin against the side of the can to remove loose debris.
CLEANING THE DIRT FILTER
To maintain optimal performance, the Dirt Filter will need cleaning whenever the suction is not strong. The
Dirt Filter must be clean and free of elements, which might hinder the flow of air.
1. Turn the Control Dial to the OFF position and unplug the unit.
2. Pull the Collection Bin outward from the front of the Bin Cavity. Grasp the Collection Bin Grip firmly and
lift it out and away from the EYE-VAC PROFESSIONAL Main Unit. Locate the Dirt Filter Handle.
3. Remove the Dirt Filter by grasping the Dirt Filter Handle and turning counter-clockwise to the “unlock”
position. Pull the Filter straight up and out of top of the Collection Bin((See Figure 3.). Rinse under running
water to clean.
4. IMPORTANT! Dry thoroughly before use.
5. Slide the Dirt Filter back into the top of the Collection Bin. Rotate clockwise to the “lock” position. Put the
Collection Bin back into place.
IMPORTANT! NEVER OPERATE THE EYE-VAC PROFESSIONAL WITHOUT THE DIRT FILTER
PROPERLY IN PLACE.