Activeforever Eye-Vac EVPro Electric Dust Pan - Manual (Page 8)

Trouble shooting
Problem Possible cause Possible solution
EYE-VAC PROFESSIONAL
won't run 1.Not firmly plugged in 2.Unit is
in OFF position 3.Dirt filter is not
in position 4.No power in wall
plug 5.Blown house fuse or tripped
circuit breaker 1.Plug in firmly 2.Turn control dial to MAN or AUTO
position 3.Re-attach collection bin lid to top of collection bin
4.Check house fuse or circuit breaker 5.Have a qualified
licensed electrician replace house fuse or reset circuit
breaker
Does not pick up debris
1.Dirt inlet is blocked 2.Container
is full 3.Debris may be too large
for inlet
First. Turn control dial to OFF position 1.Clean path of dirt
inlet 2.Empty collection bin 3.Clear large debris
Eye-Vac sensors do not activate 1.Unit is not in AUTO mode 1.Turn control dial to AUTO position
Suction is not strong 1.Filters may be dirty 1.Turn control dial to the OFF position 2. Clean Dirt filter or
Micro Exhaust filters when needed.
Status indicator light blinking 1.Eye-Vac sensors have been shut
off for 30 seconds which caused
power to the motor to be shut off 1.Turn control dial to the OFF position 2.Check dirt filter
and micro exhaust filters to ensure they are clean. Clean or
replace if necessary 3.Clean sensors 4.Turn control dial to
the AUTO position
Collection Bin Indicator Light is
ON 1.Collection bin is full 1. Empty the Collection Bin; 2.Clean all dirt filters
Debris at inlet before unit is
powered on 1.Turn control dial to the MANUAL position 2. Activate
unit manually