Activeforever AZ-1 Portable Automobile Hand Controls User Manual
Page 9
9
Accessories and Replacement Parts
Grip – heat resistant
Snap Pins .250” (¼”)
Snap Pins .3125” (5/16”)
Maintenance and Service Instructions
While in use the AZ-1 requires daily safety checks. On each daily use of the vehicle verify
the following before using the AZ-1 portable hand controls.
• Make sure that all nuts, bolts, pins and finger screws are tight and secure. It is
necessary to always keep the correct wrenches to tighten the hardware as
necessary. If anything is unsafe or unsecured DO NOT OPERATE THE
VEHICLE with the AZ-1 portable hand controls.
• Verify that the location of the clamps while mounted on vehicle pedals is safely
located each time you drive the vehicle.
• When storing the AZ-1 portable hand controls be sure to keep all components
together. Do not substitute other hardware or parts in place of the standard
material provided. If for any reason that a part in misplaced or damaged
contact Hand Control Inc. or your local supplier for replacement parts. See
parts list for correct identification.
Warranty
Hand Control, Inc. warranties that AZ-1 portable hand control for the life of the user that
purchases the item. You must complete the warranty registration card within 90 days of
purchase to qualify for the warranty. Shipping is not included for warranty replacements.
Safety Information
Contact your local Deparment of Motor Vehicle for requirements in your state. Each state
has different requirements for use of portable hand controls while driving a vehicle.