Activeforever Lotus Water Treatment System (Replacement Filter) - Manual (Page 9)

OPERATING YOUR WATER TREATMENT SYSTEM
7
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
Ready to make some of the cleanest, safest water you’ve
ever tasted?
Fill your Processing Carafe with water to the fill line. (FIGURE 1) Return it to the base
unit, (FIGURE 2) and lock into place. Push the process button and it will light up green.
Make certain the lock symbol on the processing carafe lines up with the lock
symbol on the main unit.
Right now you should be noticing bubbles in the Processing Carafe. This is the first
stage of the treatment process-the ozonation process-at work. The system is killing
microorganisms that may be in your water.
To stop the system during processing, press the process button
once or unlock the Processing Carafe from the base.
Once the ozonation process is complete, the water will be ready to pass through to the
second stage-the filtration process. The second stage uses a custom-formulated
carbon-block filter to capture microorganisms and other contaminants. By utilizing two
stages, your Water Treatment System eliminates at least 99.99% of E-coli, 99.75%
of salmonella and other microorganisms. (See “Performance Data List” for details.)
When the manual dispense button turns green, and the process light goes off,
treated safe water is ready to be dispensed.
You now have two options:
AUTOMATIC DISPENSE:
Place the Clean Water Carafe (without the lid),
under the dispense nozzle to activate the auto-dispense button (FIGURE 3). Your
carafe, which has been specially designed to activate the auto dispense button, will
automatically be filled with water. Set on the table during meals. To keep the water
cool, the carafe stores conveniently in most fridges.
MANUAL DISPENSE:
Want a glass of water? Simply hold a glass under the
dispense nozzle. Press and hold the manual dispense button to fill, (FIGURE 4) and
release the manual dispense button to stop.
If the water is not completely dispensed after the completion of the
treatment cycle, the water left in the Processing Carafe can be
dispensed for up to 12 hours, providing that the Processing Carafe is
locked in place.
If water is left in the Processing Carafe for more than 12 hours and
the manual dispense button is pressed, the manual dispense button
will flash red for several seconds. Unlock the Processing Carafe, take
it to the sink and add additional water if necessary to bring the water
to the fill line, then return it to the base unit and lock the treatment
chamber in place. Restart by pressing the process button.