Activeforever eWheels Commute Moped 600 Watt - Manual (Page 2)

e wheels e wheels
TM
Please observe and follow these instructions closely as it will insure safe and reliable operation.
Tools you will need to assemble the EW-500
1. Phillips Screwdriver
2. 12mm Socket Driver or Socket Wrench w/ Extension
3. 17mm Wrench
4. 15mm Wrench
5. Pliers
6. Knife
1. Remove the EW-500 from it’s carton. Start by opening the top to allow access to the inside of the carton.
Use a knife to cut each corner from the inside out (Figure A). Once all four corners are cut it will allow 360
degree access to your new moped eliminating heavy lifting.
2. Place the EW-500 on it’s kickstand.
(A)
www.ActiveForever.com