Activeforever eWheels Commute Moped 600 Watt - Manual (Page 7)

e wheels e wheels
TM
Front Wheel Installation
Tools you will need to attach the front wheel
- 17mm Wrench
- Pliers
1. Unscrew the saddle nut at the end of the brake cable to loosen tension on the front brake.
(Figure E).
2. Slide front axle and spacer onto the right side (None brake side) of the fork (Figure F).
3. Move front wheel into place. Insert brake drum into wheel and line up all holes (Figure G). Then slide axle
through and tighten bolt with Pliers and 17mm wrench. (Note) Make sure to mate the tab on the fork with the
slot on the drum brake as the front wheel is attached (Figure H)
(E) (F)
(G) (H)
Saddle Nut
www.ActiveForever.com