E wheels e wheels – Activeforever eWheels Commute Moped 600 Watt User Manual
Page 8
e wheels
e
wheels
TM
Front Wheel Installation
4. Tighten the saddle nut at the end of the brake cable to create tension on the front brake (Figure I). Test front
brake as you tighten the saddle nut. Tighten until brake lever has about .75” between the lever and grip.
(I)
Rear Brake Installation
4. Unscrew saddle nut on the end of the brake cable (Figure J). Remove the barrel plug and slide it into the
drum brake arm. Then attached brake cable through the hole in the barrel plug (Figure K) and tighten saddle
nut (Figure L). Tighten the saddle nut at the end of the brake cable to create tension on the rear brake. Test
rear brake as you tighten the saddle nut. Tighten until brake lever has about .75” between the lever and grip.
(J)
(K)
(L)
Saddle Nut
Barrel Plug