Actron CP9180 OBD II AutoScanner Plus - Manual (Page 23)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2 – 7
Getting Started
2
Diagnostic Link Connector (DLC)
The Data Link Connector (DLC) is used with scan tool to communicate
with the vehicle’s control module.
✓
Data Link Connector
Location.
❒
Under dashboard on
driver side of vehicle.
❒
If Data Link Connector
is not located under
dashboard, a label
should be there telling location.
Data Link Connector (DLC) Pins
1 - Manufacturer Reserved
2 - J1850 Bus+
3 - Manufacturer Reserved
4 - Chassis Ground
5 - Signal Ground
6 - CAN High, J-2284
7 - K Line, ISO 9141-2 & ISO/DIS 14230-4
8 - Manufacturer Reserved
9 - Manufacturer Reserved
10 - J1850 Bus-
11 - Manufacturer Reserved
12 - Manufacturer Reserved
13 - Manufacturer Reserved
14 - CAN Low, J-2284
15 - L Line, ISO 9141-2 & ISO/DIS 14230-4
16 - Battery Power
1
9
8
16