Keypad test – Actron CP9180 OBD II AutoScanner Plus User Manual
Page 35
Advertising
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 9
Using The Scan Tool
3
4. When Done, Press
BACK Key.
Keypad Test
The Keypad Test is used to verify keys are working correctly.
From System Setup menu:
1.Select Keypad Test.
•Use
UP or DOWN arrow
key until Keypad Test is
highlighted.
•Press
ENTER.
Check for missing
spots in display
Display Test
Press Back to Quit
SYSTEM SETUP
=====================
Contrast Adjust
Display Test
Keypad Test
Memory Test
Tool Information
Program Mode
Advertising
This manual is related to the following products: