Actron CP9449 ABS BrakeScan - Manual (Page 6)

6
Display Elements
The display has a large viewing area for posting messages, instructions,
and diagnostic information. The following symbols may appear on the
display:

Indicates that additional information is available on the previous
screen. Press the p UP arrow key to view the data.
 Indicates that additional information is available on the next screen.
Press the q DOWN arrow key to view the data.
Indicates that the USER key is active. Press the USER key to
read codes. The USER key is not active on battery power.
 Indicates that the internal battery needs replacing or is not installed.
Replace or install the internal battery.
Using the ABS BrakeScan Tool
Installing Internal Batteries
The Tool requires a 9V alkaline battery to operate without vehicle power.
Review Codes, Code Lookup, and System Setup functions work on
internal battery and vehicle power. The Read Codes function works on
vehicle power only.
When the battery needs to be replaced, the low-battery icon () displays.
To replace the battery:
Place display face down on a non-abrasive surface.
Remove battery cover by turning screw counterclockwise and sliding
cover off.
Remove battery and properly discard.
Install new 9V Alkaline battery.
Reinstall battery cover by sliding on and turning screw clockwise.
1.
2.
3.
4.
5.