ACU-RITE VUE - Manual (Page 31)

VUE 17
I – 2 Milling Specific Oper
ations
Linear Pattern
Information required:
„ Linear pattern type (array, or frame)
„ First hole (1st hole of the pattern)
„ Holes per row (number of holes in each row of pattern)
„ Hole spacing (the spacing, or offset between each hole in the row)
„ Angle (the angle, or rotation of the pattern)
„ Depth (the target depth for drilling in the tool axis)
„ Number of rows (number of rows in the pattern)
„ Row spacing (the spacing between each row of the pattern)
Information entry, and operation of the Linear Pattern feature is very
similar to the Hole Pattern feature described earlier.
Incline & Arc Milling
The incline, and arc milling features provide ways to machine a flat
diagonal surface (incline milling), or a rounded surface (arc milling)
using a manual machine.
The following soft keys are also available while in the Entry Form.
Function Soft key
Press this to select a plane.
Press to execute the milling operation.
Press this to use the existing position.
Press to return to the previous step.
Press to advance to the next step.