ACU-RITE VUE - Manual (Page 7)

VUE vii
Intr
oduction
Introduction
Software Version
The software version is shown on the initial power up screen.
VUE
DRO axis availability.
Symbols within Notes
Every note is marked with a symbol on the left indicating to the
operator the type and/or potential severity of the note.
VUE Fonts
The following shows how the soft, and hard keys are represented
within the text of this manual:
„ Soft keys - SETUP soft key
„ Hard keys - ENTER hard key
This User's Manual covers the functions of the VUE for
both milling and turning applications. Operational
information is arranged in three sections: General
Operations, Mill Specific Operations and Turn Specific
Operations.
The VUE DRO is available in one, two, and three axis
form. The 3 axis VUE DRO is used through out this
manual for illustration and description of function keys.
General Information
e.g. on the behavior of the VUE.
Warning
e.g. when a special tool is required for a function.
Caution - Risk of electric shock
e.g. when opening a housing.