Alpine PXA-H800 - Manual (Page 18)

ALPINE PXA-H800_EN 68-13530Z69-A (B5)
16
-EN
Connecting an Ai-NET compatible AV Head Unit (IVA-D800R), ALPINE Navigation System, Ai-NET
compatible Changer and External Amplifier
Fiber optic cable (Sold separately) * 2
To Digital Output
Terminal (Optical)
To Ai-NET Output
Terminal
Ai-NET compatible
Changer *
4, * 5
Remote On Lead
Blue/White
To External Amplifier
(see page 10)
Guide Control Lead
White/Green
Not Connected
Guide Control
Lead
White/Green
Navigation audio
input connector
Remote Control
Output Lead
Blue/White
Ground Lead
Black
To Remote On Lead of
an External Amplifier
Connect to a metal
part of chassis body
with a screw.
Battery Lead
Yellow
Fuse 10A
12V
Illumination Lead* 1
Orange
Fiber optic cable (Sold separately)
Illumination
Lead*
1
Orange
Ai-NET extension cable* 7
KCE-900E (Sold
separately)
Guide
Signal I/F
for External
Navigation
To GUIDE Output
Terminal
To RGB
Output
Terminal
RGB Cable
To RGB
Output
Terminal
ALPINE
Navigation
System (Sold
separately)
To RGB Input Terminal
(KCE-900E included)
To RGB Input Terminal
Ai-NET compatible
AV Head Unit
(IVA-D800R) (Sold
separately) *
3
To Digital
Output Terminal
(Optical)
To Ai-NET Output
Terminal
Computer
connection
terminal
RUX-C800 (Sold separately)
Commander cable
(RUX-C800 included)
Audio output jacks Not Used
Ai-NET extension cable (Changer included)
RCA extension cable
(Sold separately)
Remote Control
Eye (DVD Changer
included) *
6
To Remote
Control Eye Jack
* 1 Use when connected with the RUX-C800 Commander (sold separately).
* 2 Use when connected with an Optical Digital compatible Changer.
* 3 Set the system switch to [EQ/DIV] or [EXT AP]. For details, refer to the Owner’s Manual for the product connected.
* 4 Setting the system switch is required. For details, refer to the Owner’s Manual for the connected changer.
* 5 If the Ai-NET compatible Changer is a DVD Changer (DHA-S690 Series or DHA-S680 Series), do not connect its Switched Power Lead
(Red).
* 6 If the Ai-NET compatible Changer is a DVD Changer (DHA-S690 Series or DHA-S680 Series), do not connect the Remote Control Eye in
a system that uses an Ai-NET compatible AV Head Unit. (Connection of the remote input cord (white/brown) is required.) Use the Remote
Control Eye in a system that uses any other manufacturer’s monitor. For details, refer to the connected DVD changer’s instruction manual.
* 7 If connecting DVA-5210, connect it between the unit and the head unit using an additional Ai-NET extension cable. In this case, also
connect the audio output jacks (L=white/R=red) of DVA-5210 to the AUX INPUT CH-1 (L)/CH-2 (R) jacks of the unit.
C
When u
When
digita
Do no
•
•