Garmin NavTalk GSM - Manual (Page 38)

28
Section 3
Handling A Call
Phone Operation
The Active Call Page
You can employ a variety of options to perform call handling tasks from
the Active Call Page. This page displays whenever you are dialling, answer-
ing, holding, transferring or conferencing calls.
Answering a Call
1. Press the SEND key or highlight the ‘Talk’ button and press ENTER.
You may also use the Auto-Answer feature as explained on page 58.
Placing a Call on Hold
1. Highlight the on-screen ‘Hold’ button and press the ENTER key to place
a call on hold while you answer another incoming call, talk to someone
already on hold, listen to voice mail messages, or perform a task that
takes you away from the phone.
2. To return to the person just placed on hold, highlight the Hold tab to
display the Hold List. Then highlight call on hold and press ENTER.
Muting a Call
1. Highlight the on-screen ‘Mute’ button and press the ENTER key to
mute the microphone in order to talk privately with someone nearby
without the person on the phone overhearing your conversation.
2. To restore the microphone to normal, highlight and press the on-screen
‘VOICE‘
button.
Ending a Call
1. Press the END key, or highlight the on-screen ‘End’ button and
press ENTER at any time.
Incoming Call Page
Answering a Call
Ending a Call
Press the key.
Press the key, or highlight the on-screen ‘END’ button
and press ENTER.
Placing A Call On Hold
NvTlkGSMManual copy.indd 28 12/2/2002, 8:42:14 AM