Garmin NavTalk GSM - Manual (Page 64)

54
Section 3
Phone Settings
Phone Operation
Earpiece
Volume Control
Ringer Volume
Control
Key Beeps
Volume Control
Volume Settings Tab
Volume Settings
Earpiece Volume - Allows you adjust the earpiece volume to fit the
environment profile you are creating.
Ringer Volume - Allows ringer volume for the particular profile being
created.
Key Beeps Volume - Allows you to adjust the key beep volume as
appropriate for the environment profile being created.
To set volumes for each control:
1. Use the Down ARROW key to highlight the volume control slider for
the
Earpiece.
2. Press the ENTER key to isolate the slider bar and then use the Up/
Down ARROW key to adjust the Earpiece volume.
3. Use the Right ARROW key to highlight to the volume control slider for
the
Ringer.
4. Press the ENTER key to isolate the slider bar and then use the Up/
Down ARROW key to adjust the Ringer volume.
5. Use the Right ARROW key to highlight to the volume control slider for
the Key Beeps.
6. Press the ENTER key to isolate the slider bar and then use the Up/
Down ARROW key to adjust the Key Beep volume.
7. Press the ENTER key to isolate the slider bar and then use the Up
ARROW key to return to the Volume Tab, then press the Right ARROW
key again to move to the ‘General’ tab to complete customizing the
environment. Or...press the CLEAR key to return to the Profi les Page.
When using the Volume
Up/Down keys to adjust
the earpiece volume, this
display will appear.
One press of the key
opens the display and
subsequent presses
adjust the volume.
The display will timeout
and close after a few
seconds.
When you change
the volume using this
method, it will reset the
earpiece volume for the
environment profi le cur-
rently in use.
NvTlkGSMManual copy.indd 54 12/2/2002, 8:42:43 AM