Product registration, Contact garmin, Declaration of conformity – Garmin GPSMAP 7215 User Manual
Page 128: Software license agreement
122
GPSMAP
®
6000/7000 Series Owner’s Manual
Appendix
Transmitting NMEA 0183 Data over a NMEA 2000 Network
You can turn on, configure, or turn off output bridging. Output bridging occurs when a chartplotter takes
NMEA 0183 data it receives from any source, formats it into NMEA 2000 data, and sends it over the NMEA
2000 bus.
1. From the Home screen, select
Configure
>
Communications
>
NMeA 2000 Setup
>
output Bridging
.
2. Complete an action:
• Select
on
to enable output bridging from the chartplotter.
• Select
Auto
to allow the chartplotters on the network to negotiate with each other to determine which
chartplotter will perform this function. Only one chartplotter on the network can bridge NMEA 0183
data over the NMEA 2000 bus at a time.
All GPSMAP 6000 series and 7000 series units are NMEA 2000 certified.
Product Registration
Help us better support you by completing our online registration today. Go to
, in a safe place.
Contact Garmin
Contact Garmin Product Support if you have any questions while using your chartplotter. In the USA, go to
www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to www.garmin.com/support and click
Contact Support
for in-country support information, or
contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
Declaration of Conformity
Hereby, Garmin, declares that this product is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, see the Garmin Web site for
your Garmin product:
Software License Agreement
BY USING THE CHARTPLOTTER, YOU AGREE TO BE BOUND BY THE TERMS AND
CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS
AGREEMENT CAREFULLY.
Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this
device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership
rights, and intellectual property rights in and to the Software remain in Garmin and/or its third-party providers.
You acknowledge that the Software is the property of Garmin and/or its third-party providers and is
protected under the United States of America copyright laws and international copyright treaties. You further
acknowledge that the structure, organization, and code of the Software, for which source code is not provided,
are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code
form remains a valuable trade secret of Garmin and/or its third-party providers. You agree not to decompile,
disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or
any part thereof or create any derivative works based on the Software. You agree not to export or re-export the
Software to any country in violation of the export control laws of the United States of America or the export
control laws of any other applicable country.