Garmin GPSMAP 7215 - Manual (Page 41)

GPSMAP ® 6000/7000 Series Owner’s Manual 35
Navigation
Moving a Saved Waypoint
1. From the Home screen, select Information > User Data > Waypoints .
2. Select a waypoint.
3. Select
Review > Move .
4. Indicate a new location for the waypoint:
• Select Use Chart to move the waypoint while viewing a chart. For the GPSMAP 6000 series, use the
Rocker to select a new location on the chart. For the GPSMAP 7000 series, touch a new location on the
chart. Select Move Waypoint .
• Select enter Position to move the waypoint using coordinates. For the GPSMAP 6000 series, use the
Rocker to enter the coordinates of the new location. For the GPSMAP 7000 series, use the on-screen
keyboard. Select Done .
Deleting a Waypoint or an MOB
You can delete a waypoint or an MOB that has been saved.
1. From the Home screen, select
Information > User Data > Waypoints .
2. Select a waypoint or an MOB.
3. Select
Review > Delete .
Deleting All Waypoints
From the Home screen, select Information > User Data > Clear User Data > Waypoints > All .
Copying Waypoints
See “Chartplotter Data Management” ( page 69 ).
Routes
You can create and save up to 20 routes. Each route can contain up to 250 waypoints.
Creating and Navigating a Route from Your Present Location
You can create and immediately navigate a route on the Navigation chart or the Fishing chart. This procedure
does not save the route or the waypoint data.
Note: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select
Chart .
2. Select Navigation Chart or Fishing Chart .
3. Complete an action:
• For the GPSMAP 6000 series, use the Rocker to select a destination using the cursor ( ).
• For the GPSMAP 7000 series, touch a destination using the cursor ( ).