Garmin GPSMAP 7215 - Manual (Page 48)

42 GPSMAP ® 6000/7000 Series Owner’s Manual
Where To?
Where To?
Use the Where to? option on the Home screen to search for and navigate to nearby fuel, repairs, and other
services, as well as waypoints and routes that you have created.
Marine Services Destinations
Note: This feature may not be available in all areas.
The chartplotter contains information about thousands of destinations offering marine services.
Navigating to a Marine Services Destination

CAUTION
The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart information. That
data does not assure obstacle and bottom clearance. Carefully compare the course to all visual sightings and
avoid any land, shallow water, or other obstacles that may be in your path.
When using Go To, a direct course and a corrected course may pass over land or shallow water. Use visual
sightings and steer to avoid land, shallow water, and other dangerous objects.
Note: Auto Guidance is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select
Where to? > offshore Services .
2. Select the marine service category to which you want to navigate.
The chartplotter shows a list of the 50 nearest locations and the distance and bearing to each.
3. Select a destination.
tIP: Select Next Page to view additional information or to show the location on a chart.
4. Select Navigate to .
5. Complete an action:
• Select Go to .
• Select Route to .
• Select Guide to to use Auto Guidance.
6. Review the course indicated by the magenta line.
Note: When using Auto Guidance, a gray line within any part of the magenta line indicates that Auto
Guidance cannot calculate part of the Auto Guidance line. This is due to the minimum safe water depth and
the minimum safe obstacle height settings ( page 59 ).
7. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.
Go To Screen Guide To Screen (BlueChart g2 Vision)