Garmin GPS 75 - Manual (Page 35)

4-2
Leg Distance
There are 3 route pages in the GPS 75. The softkeys at the bottom of each
page allow cycling through each page: RTE (route definition), ACTV
(active route), and LIST (route list).
4.2CREATING AND COPYING A ROUTE
The Route Definition page allows you to create, change, review, copy, and
activate routes. Remember that route 0 is always the active route. If you
create a route in route 0, you should copy it into an empty storage route
(1-9). When you activate a storage route 1-9, it will be copied to route 0
for activation.
Route Definition
Press the RTE key. If you are not already on the Route Definition Page,
press the RTE softkey. On the route number field, you may choose
between routes 0 through 9 with CLR. Next to this is another cyclic field
which allows you to activate the route, clear the route, copy the route to
another location, or invert the order of the waypoints in a route and
activate it. The arrow keys allow you to scroll through the list of
waypoints in a route.
To Create a Route...
· Move the cursor to the route
number field and press CLR until
you find an empty route.
· Scroll to the first blank waypoint
name field and type in a waypoint
you wish to put in the route.
· Press ENT.
· Repeat this process for each
waypoint you want to add, up to a
total of 20.
D e s i r e d
T r a c k
Waypoint List
Route # Field Route Action Field