Garmin GPS 75 - Manual (Page 69)

C-9
· Connect the antenna or antenna cable. No other electrical
connections are required; all power and data connections are made
through the 6-pin connector installed in the universal mount.
To remove the GPS 75 from the universal mount...
· Disconnect the antenna or antenna cable.
· Apply enough force to the release tab to allow the unit to pass as
shown above.
· Pull the bottom of the GPS 75 out, then rotate the top downward
and out.
To adjust the universal mount angle...
· Loosen the mount by turning the lever counter-clockwise.
· Rotate and/or tilt the unit to the desired position.
· Tighten the lever.