Garmin GPS 100 User Manual
Page 102
Advertising
·
Move the cursor over “OK?” and press ENT. You have just created
a waypoint right at your present position named FTMYR.
Now that the sample waypoints are created, we will create the sample route
using these waypoints.
Create the sample route...
·
Press the RTE key until the Route Catalog Page is displayed as
illustrated below.
·
Press the right or left arrow key until the cursor is over route 1.
·
With the cursor over route 1, press the ENT key. You have just
selected the Route Review Page for route 1 as illustrated below.
Notice that the route is empty (it does not contain any waypoints).
·
Enter FTMYR as the first waypoint of the route. This is the waypoint
from which our voyage will start.
15-7
Advertising