Garmin GPS 100 - Manual (Page 34)

4-10
right arrow key to scroll down the list.
· Place the cursor over the first waypoint name on line 1 and press the
left arrow key to scroll up the list.
The Waypoint Catalog Page allows you to delete waypoints which are not
used in any route and are not members of the proximity list. (NOTE: If you
wish to delete a waypoint that is used in a route or is a member of the proximity
list, first remove it from the route and/or proximity list before attempting to
delete the waypoint.)
To delete a waypoint from memory...
· Place the cursor over the desired waypoint and press the CLR key.
The waypoint name will become blank.
· Press the ENT key, the waypoint will be deleted from memory.
The Waypoint Catalog Page also allows you to rename user waypoints.
To rename a user waypoint...
· Place the cursor over the desired waypoint.
· Enter a unique waypoint name. If you enter a name that is already
used, you will be informed with the message “WPT EXISTS ____”
(where the blank will be filled in with the waypoint name). Enter a
different waypoint name if this occurs. After entering a unique
waypoint name, the Rename Waypoint Page will be displayed as
illustrated below.
RENAME WAYPOINT PAGE
· With the cursor over “OK?” press the ENT key. The waypoint will be
renamed, the Waypoint Catalog Page will be displayed and the
waypoint list will be re-ordered alphabetically.