Garmin GPS 100 - Manual (Page 16)

Chapter 13 for more details.)
Pressing the GOTO key allows you to activate the GOTO function,
which will set an instantaneous course to any waypoint. (See
Chapter 6 for more details.)
Pressing the AUTOSTO key allows you to capture your present
position on an instantaneous basis. The AutoStore
TM function also
allows you to place the waypoints in a route. (See Chapter 8 for
more details.)
Pressing the SET key selects the setup pages which allow you to
customize the unit as you like. (See Chapter 11 for more details.)
Pressing the RTE key selects the route pages which allow you to
edit, review, activate, and delete routes. (See Chapter 7 for more
details.)
Pressing the WPT key selects the waypoint pages which allow you
to create, edit and delete waypoints. In addition, you may view your
nearest waypoints and set waypoint proximity alarms. (See
Chapter 4 for more details.)
Pressing the NAV key selects the navigation pages which allow you
to view navigation information and perform planning functions.
(See Chapters 5, 9, and 10 for more details.)
Pressing the right or left side of this rocker key allows you
to move the cursor, scroll through information lists, and enter
letters of the alphabet.
The alphanumeric keys allow you to enter letters and numbers
into the GPS 100.
If you want to enter a number, for instance “1”, simply press
the 1 key. If you want to enter a letter, for example “A”, press the 1 key, then
press the right arrow key once to select “A” (you may also press the left arrow
key three times to display the "A").
Pressing the CLR key erases information in the cursor field. If the cursor is
2-3