Garmin StreetPilot c530 - Manual (Page 30)

22 c530 Owner’s Manual
A
PPENDIX
• Register your product at
www.garmin.com/registration . This
may help if your unit is stolen.
• Use the Garmin Lock ™ feature. See
page 6 .
Changing the Fuse
An AGC/3AG 2-Amp, high-breaking
capacity, 1500 A-rated fuse is located
at the tip of the vehicle adapter.
Periodically, you may
need to change the fuse.
Unscrew the black,
round end piece, and
replace the fuse.
Using a Remote Antenna
You can use an optional external remote
antenna (GA 25MCX). To purchase, go
to the Garmin Web site at www.garmin
.com/products/sp530 , and click the
Accessories link.
Remove the weather cap from the
antenna connector located on the left of
the c530, and connect the antenna.
About Satellite Signals
Your c530 must acquire satellite signals
to operate. If you are indoors, near tall
buildings or trees, or in a parking garage,
the c530 cannot acquire satellites.
Go outside to an area free from tall
obstructions to use your c530. When the
c530 has acquired satellite signals, the
signal strength bars on the Menu page
are green . When it loses satellite
signals, the bars turn red or disappear
. For more information about GPS,
visit www.garmin.com/aboutGPS .
Charging the c530
To charge the c530, connect the power
cable to the c530 and a power source.
Calibrating the Screen
If the touch screen is not responding
properly, calibrate the touch screen.
Turn the unit off. Press and hold the
Power button for about one minute until
the Calibration screen appears. Follow
the on-screen instructions.
Unscrew