Garmin StreetPilot c530 - Manual (Page 34)

26 c530 Owner’s Manual
A
PPENDIX
Troubleshooting
Problem/Question Solution/Answer
My c530 never gets
satellite signals.
Take your c530 outside, away from tall buildings and
trees.
How do I know my
c530 is in USB mass
storage mode?
When your c530 is in USB mass storage mode, a picture
of a c530 connected to a computer is shown. Also, you
should see two new removable disk drives listed in My
Computer .
My computer never
senses that the c530
is connected.
1. Unplug the USB cable from your computer.
2. Turn the c530 off.
3. Plug the USB cable into your computer and your
c530. The c530 automatically turns on and goes into
USB mass storage mode.
I cannot find any
drives named
“Garmin” in my list of
drives.
If you have network drives mapped on your computer,
Windows may have trouble assigning drive letters to your
c530 drives. See the operating system’s Help file to learn
how to rename and assign (map) your drives.
I get a message
saying “Unsafe
Removal of Device”
when I unplug the
USB cable.
When you are ready to disconnect your c530 from your
computer, double-click the Unplug or Eject icon in
your system tray. Select USB Mass Storage Device ,
and click Stop . Select the c530 drives, and click OK . You
can disconnect your c530 from your computer now.