Garmin GPS 12MAP - Manual (Page 44)

3 34
Save As Waypnt— creates a waypoint at the
exit location and saves it in memory. If the
exit name is longer than six characters, it will
be abbreviated when creating the waypoint.
To save an exit location as a waypoint:
1. Select ‘Save As Waypnt’ (from the Exit Info Page
Options) and press ENTER.
2. With ‘Done’ highlighted, press ENTER to save the
new waypoint.
Services Setup— allows you to designate
which service types you wish to display on
the exit services pages. Those service types
which you disable will not be included in the
number of available services (on the Exit Info
Page) or in the Services Near Exit List.
To designate the service types you want
to appear on the exit services pages:
1. Select ‘Services Setup’ (from the Services Near
Exit List Options) and press ENTER.
2. Use the rocker keypad to select the desired
service type and press ENTER to toggle between
enabled (denoted by an “X”) or disabled.
Restore Defaults— resets all options to the
factory default settings.
To restore the factory default settings,
highlight ‘Restore Defaults’ (from any
exit services page option window) and
press ENTER.
REFERENCE
Map Page:
Exits
Options window for the
Services Near Exit List
‘Services Setup’ allows
you to designate which
service types you’d like
to have displayed on the
exit service pages.
Options window for the
Exit Info Page ‘Save As
Waypoint’ allows you to
create a waypoint at a
highway exit location