Garmin GPS 12MAP - Manual (Page 85)

75
REFERENCE
Setup Menu:
Timers
The ‘User Timer’ option
provides both count up
and count down timers.
The battery timer will
automatically reset
when depleted batteries
are replaced with a fresh
set.
Timers Settings
User Timer lets you select a count up or
count down timer. For a count down timer
you may also specify the count down
duration.
To select a user timer setting:
1. For a count down timer, highlight the ‘User Timer’
field in the right-hand column, press ENTER and
enter the count duration using the rocker keypad.
Press ENTER to accept, then—with the left-hand
column highlighted—press ENTER to view the
User Timer options. Select ‘Down’ and press
ENTER.
2. For a count up timer, highlight the ‘User Timer’
field in the left-hand column, press ENTER and
select ‘Up’. Press ENTER to confirm.
3. To reset the timer or turn the timer off, highlight the
‘User Timer’ field in the left-hand column, press
ENTER and select ‘Reset’ or ‘Off’ (as appropriate).
Press ENTER to confirm.
Battery Timer provides a running count of
how long the GPS 12 MAP has been in
operation with the current batteries. The
timer automatically stops when using an
external power source. The timer will
automatically reset when depleted batteries
are replaced, but can also be manually reset.
To select a battery timer setting:
1. Highlight the ‘Battery Timer’ field in the left-hand
column and press ENTER.
2. Select ‘Off’, ‘On’ or ‘Reset’ (as appropriate) and
press ENTER.
Since Midnight provides a running count of
how long the GPS 12 MAP has been in
operation since midnight of the current day.
Since Factory Reset provides a running
count of total GPS 12 MAP operating time
since the receiver was shipped from the
factory.