Initialization – Garmin GPS 120XL User Manual

Page 11

Advertising
background image

Initializing the Receiver (cont)

3. Use the

D

key to scroll through the list options until

the country of your present position appears.

4. Use the

U

key to highlight the country/state/region

you’re in. If the country you’re in is not listed, select
another country within 500 miles of your present
position.

5. Press

F

to finish.

The GPS 120XL will now begin searching for the

appropriate satellites for your location and should
acquire a position within 3-5 minutes. You can verify
that you have acquired a position by watching the
Satellite Page transition to the Position Page (provided
you haven’t pressed any other buttons) or by looking for
a ‘2D NAV’ or ‘3D NAV’ status at the top left corner of
the Satellite Page.

Initialization Troubleshooting

If you have trouble initializing the receiver or

acquiring a position, check the following:

• Does the antenna have a clear view of the sky?

If there are large buildings or mountains nearby, or
if there is heavy tree cover, the receiver may not be
receiving enough satellite signals to calculate a
position.

• Have you selected the right country/state/region

from the EZinit list?

Check for the correct approximate lat/lon on the
Position Page, or reselect the appropriate country
from the list to restart the initialization.

• Have you moved more than 500 miles from the

last calculated position with the receiver off?

Reinitialize the receiver, selecting the country/state/
region of your new location from the EZinit list.

Your unit should now be initialized. If you want to

complete the Getting Started Tour at another time, you
may now turn the GPS 120XL off (see below) or you
may continue.

To turn the GPS 120XL off:

1. Press and hold

P

for approximately three seconds

until the receiver turns off.

7

The GPS 120XL’s Satellite
Page will help you deter-
mine which satellites are in
view and whether or not
any satellites are being
“shaded” or blocked from
the receiver’s antenna.

By monitoring the signal
strength bars at the bottom
of the page and the sky view,
you’ll be able to see how
moving to another area with
a clearer view of the sky will
improve satellite reception
and speed up signal
acquisition.

GETTING

STARTED

Initialization

120XL Man RevB 7/10/98 10:54 AM Page 7

Advertising