Garmin GPS 120XL - Manual (Page 44)

Zooming, Panning, & Pointing (continued
To go to a waypoint highlighted on the map:
1. Press the G key.The GOTO waypoint page will
appear with the waypoint’s name highlighted.
2. Press the F key to confirm.
To stop the panning function and display your
present position:
1. Press the
Q
key.
Using the Cursor to Mark and GOTO Waypoints
During panning, the crosshair represents a target
position right on the moving map, with the range and
bearing to the target displayed at the top corners of the
screen.
To mark the target crosshair position as a new
waypoint:
1. Press the
F
key to capture the position.
2. Enter a new name and route number and press F .
You can also use the target crosshair as an instant
GOTO destination. This function will mark and instant-
ly set a course for a new waypoint called ‘MAP’.
To GOTO the target crosshair:
1. Press the G key to capture the position.
2. Press the
F
key to confirm the MAP GOTO.
To save the MAP waypoint,rename it, as it will be
overwritten the next time a map GOTO is executed.
Using the
Cursor on the
Map
REFERENCE
40
To mark a waypoint with
the crosshair, simply pan to
the desired position and
press the ENTER key.
The crosshair may also be
used to define a GOTO des-
tination by panning to the
desired position and press-
ing the GOTO key. To save
the MAP waypoint, rename
it, as it will be overwritten
by the next MAP waypoint.
120XL Man RevB 7/10/98 10:55 AM Page 40