Symbols, Intended use, Technical data – Bosch GHP 5-14 User Manual

Page 11

Advertising
background image

English | 11

Bosch Power Tools

F 016 L72 355 | (16.8.12)

f

The unit may only be used by authorised persons who have

received training or have demonstrated their ability to op-

erate the unit. The unit must not be operated by children or

juveniles (danger of accidents due to incorrect use of the

unit). Children should be supervised to ensure that they do

not play with the appliance.

f

The unit is not intended for use by persons (including chil-

dren) with reduced physical, sensory or mental capabili-

ties, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use

of the unit by a person responsible for their safety.

f

The unit must never be left unsupervised while the unit is

switched on.

f

The water jet from the high-pressure nozzle produces a re-

coil on the gun. You should therefore hold the gun and

spray lance firmly with both hands.

Transport

f

Switch off the motor and secure the unit before transport-

ing.

Maintenance

f

Switch off the unit prior to all cleaning and maintenance

work and before replacing components. Pull out the mains

plug if the unit is mains-operated.

f

Repairs may only be carried out by authorised Bosch Serv-

ice Centres.

Accessories and spare parts

f

Only use accessories and spare parts which have been ap-

proved by Bosch. Original accessories and spare parts

guarantee that the unit can be operated safely and without

any breakdowns.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the machine in a better and safer

manner.

Intended Use

The product is intended for cleaning areas and objects out-

side the house, tools, vehicles and boats, if the appropriate

accessories such as cleaning agents approved by Bosch are

used.
Intended use is related to operation within 0°C and 40°C am-

bient temperature.

Technical Data

Symbol

Meaning

Movement direction

Weight

On

Off

Lo

Low pressure

Hi

High pressure
Accessories

Pressure washer

GHP 5-14

GHP 6-14

Article number

3 600 J10 1..

3 600 J10 2..

Rated power

kW

2.4

2.6

Supply Temperature max.

°C

50

50

Supply rate min.

l/min

8.3

10.5

Rated pressure

MPa

14

14

Max. operating pressure

MPa

15

15

Flow rate

l/min

8.3

10.5

Maximum input pressure

MPa

1

1

Repulsive force at the gun to the maximum pressure

N

22.98

32.24

Motor Insulation

Class F

Class F

Motor Protection

IPX5

IPX5

Detergent tank

z

Autostop function

z

z

Net impedance

Щ

Щ

Weight according to EPTA-Procedure 01/2003

kg

23.4

25.6

Protection class

/I

/I

Serial number

See serial number (rating plate) on pressure washer.

Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0,153 ohm.

OBJ_BUCH-1762-001.book Page 11 Thursday, August 16, 2012 10:03 AM

Advertising
This manual is related to the following products: